User Manual

Figure 3-1 Acvaon Page
Cauon
The password strength of the device can be automacally
checked. We highly recommend you change the password of your
own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case
leers, numbers, and special characters) in order to increase the
security of your product. And we recommend you reset your
password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your
product.
Proper conguraon of all passwords and other security sengs
is the responsibility of the installer and/or end-user.
Aer acvaon, if you need to add the device to the client
soware or other plaorms, you should edit the device IP
address. For details, see
Communicaon Sengs.
3.2 Acvate via SADP
SADP is a tool to detect, acvate and modify the IP address of the
device over the LAN.
Before You Start
•
Get the SADP
soware from the supplied disk or the ocial
website hp://www.hikvision.com/en/ , and install the SADP
according to the prompts.
•
The device and the PC that runs the SADP tool should be within
the same subnet.
The following steps show how to
acvate a device and modify its
IP address. For batch acvaon and IP addresses modicaon,
refer to User Manual of SADP for details.
Steps
1.
Run the SADP
soware and search the online devices.
2.
Find and select your device in online device list.
3.
Input new password (admin password) and
conrm the
password.
Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend
you create a strong password of your own choosing (using a
minimum of 8 characters, including upper case leers, lower
case leers, numbers, and special characters) in order to
increase the security of your product. And we recommend you
reset your password regularly, especially in the high security
system,
reseng the password monthly or weekly can beer
protect your product.
4.
Click Acvate to start acvaon.
3