User Manual

Status of the device becomes Acve aer successful acvaon.
5.
Modify IP address of the device.
1) Select the device.
2) Change the device IP address to the same subnet as your
computer by either modifying the IP address manually or
checking Enable DHCP.
3) Input the admin password and click Modify to acvate your
IP address modicaon.
4 Enroll Administrator's Face
Aer acvaon, you should enroll an administrator's face for
further
operaon. The administrator can login the device backend
to manage and congure data.
Steps
1.
Aer acvaon, tap OK on the pop-up window. You will enter
the face enrollment page.
Figure 4-1 Face Enrollment Page
2.
Enroll the administrator's face.
1)
Tap
and follow the instrucons to enroll the face.
Note
Make sure that the enrolling face is in face shaped area.
2)
Tap to exit the face enrollment page and back to the inial
page.
Note
Aer logging in the device backend, you can enter the
Administrator module to edit the administrator's informaon.
For details, see Add Administrator.
5 Enroll via Device
5.1 Enroll Face via Device
4