User Manual

Before You Start
•
Power on and acvate the device. For details about the
acvaon, see Acvaon.
•
Enable Face Required in Set Enrollment Rule
aer logging in
the device backend.
Steps
1.
Tap on the inial page.
2.
Oponal: If you have added an administrator's face in Add
Administrator and enabled Verify by Administrator in Set
Enrollment Rule, you should verify the administrator's
permission.
Figure 5-1 Authencate Administrator Page
-
Make sure the face is in the face recognion frame when
authencaon.
Note
For details about face recognion, see Tips When
Collecng/Comparing Face Picture.
-
Tap
on the right side and enter the administrator's name
and password.
3.
Enter the User Enrollment page.
-
Create an employee ID and tap Add
-
Present a card on the card
presenng area.
4.
Enroll face.
1)
Tap
to enter the face enrollment page.
2)
Tap and follow the instrucons to enroll the face.
Note
Make sure that face is in the face recognion frame.
3)
Oponal: Tap to enroll the face again.
4)
Tap
to complete the face enrollment.
Note
For details about face recognion, see Tips When Collecng/
Comparing Face Picture.
5.
Oponal: Tap to edit the employee ID.
5.2 Enroll Fingerprint via Device
Before You Start
•
Power on and acvate the device. For details about the
acvaon, see Acvaon.
•
Set ngers in Select Finger in Set Enrollment Rule aer logging
in the device backend.
5