User Manual

Steps
1.
Tap on the inial page.
2.
Oponal: If you have added an administrator's face in Add
Administrator and enabled Verify by Administrator in Set
Enrollment Rule, you should verify the administrator's
permission.
Figure 5-2 Authencate Administrator Page
-
Make sure the face is in the face
recognion frame when
authencaon.
Note
For details about face recognion, see Tips When
Collecng/Comparing Face Picture.
-
Tap on the right side and enter the administrator's name
and password.
3.
Enter the User Enrollment page.
-
Create an employee ID and tap Add
-
Present a card on the card
presenng area.
4.
Enroll
ngerprint.
1)
Tap to enter the Select Finger page.
2) Select a nger on the Select Finger page.
Note
You can set ngers in Set Enrollment Rule.
3) Follow the instrucons and press a nger on the ngerprint
module.
If the
ngerprint is enrolled, the enrolled ngerprint on
Select Finger page will turn to blue.
4)
Oponal: Tap the enrolled ngerprint (in blue) and tap OK in
the dialogue box to clear the enrolled data and enroll a new
ngerprint.
5.
Oponal: Tap to edit the employee ID.
5.3 Enroll Card via Device
Before You Start
•
Power on and acvate the device. For details about the
acvaon, see Acvaon.
•
Set Card Number per User and Card No. Length in Set
Enrollment Rule
aer logging in the device background.
Steps
1.
Tap on the inial page.
2.
Oponal: If you have added an administrator's face in Add
Administrator and enabled Verify by Administrator in Set
Enrollment Rule, you should verify the administrator's
permission.
6