User Manual
Table Of Contents
- Legal Information
- Available Model
- Regulatory Information
- Safety Instruction
- 1 Overview
- 2 Appearance
- 3 Activation
- 4 Enroll Administrator's Face
- 5 Enroll via Device
- 6 Enroll via Client Software
- 7 Basic Operation
- A. Tips When Collecting/Comparing Face Picture
- B. Tips for Scanning Fingerprint
- C. Communication Matrix and Device Command
Figure 5-3 Authencate Administrator Page
-
Make sure the face is in the face recognion frame when
authencaon.
Note
For details about face recognion, see Tips When
Collecng/Comparing Face Picture.
-
Tap on the right side and enter the administrator's name
and password.
3.
Enroll card.
-
Present card on the card presenng area and tap OK in the
dialogue box. Create an employee ID and tap Next.
-
Create an employee ID in the input box, and tap Add to
enter the User Enrollment page. Tap
and present card on
the card
presenng area.
4.
Oponal: Tap to edit the employee ID.
6 Enroll via Client Soware
6.1 Enroll Face via Client Soware
Before You Start
•
Download and install the client soware on your computer
before enrollment.
•
Power on and
acvate the device. For details about the
acvaon, see Acvaon.
Follow the steps below to enroll face.
Figure 6-1 Flow Diagram of Enrolling Face
Steps
1.
Connect the device to the network.
2.
Place the device on the desk.
3.
Login the client
soware on the computer.
4.
Add an
organizaon.
1) Click Person to enter the Person page.
2) Click Add on the upper le of the page.
7