User Manual
Table Of Contents
- Legal Information
- Available Model
- Regulatory Information
- Safety Instruction
- 1 Overview
- 2 Appearance
- 3 Activation
- 4 Enroll Administrator's Face
- 5 Enroll via Device
- 6 Enroll via Client Software
- 7 Basic Operation
- A. Tips When Collecting/Comparing Face Picture
- B. Tips for Scanning Fingerprint
- C. Communication Matrix and Device Command
Note
Up to 10 levels of organizaons can be added.
The added organizaons will be displayed in the list on the le
of the page.
5.
Add person.
1) Select an organizaon from the list on the le.
2) Click Add on right panel.
3) Set the person's basic
informaon, including the person's
name, gender, email, tel, eecve period, and remark.
Figure 6-6 Add Person
Note
Once the person informaon is expired, the credenals and
access control sengs of the person will be invalid and the
person will have no authorizaon to access the doors.
6.
On the Credenal → Fingerprint panel, click +.
7.
In the pop-up window, select the
collecon mode as Remote
and select Enrollment Staon as the ngerprint recorder from
the drop-down list.
Figure 6-7 Add Fingerprint Page
8.
Set the enrollment staon's informaon.
1) Click Sengs and set the enrollment staon's IP address,
port No., user name and password.
2) Click OK.
9.
Enroll the
ngerprint.
1) Click Start to start enrollment.
2) Follow the instrucons on the enrollment staon to enroll
the ngerprint.
3) Click Add to save the enrollment.
10