User Manual

Figure 6-10 Add Person
Note
Once the person informaon is expired, the credenals and
access control sengs of the person will be invalid and the
person will have no authorizaon to access the doors.
6.
On the Add window, click Credenal → Card .
7.
Add the card No.
1) Click + → Sengs .
2) Set the mode as Remote and select the card enrollment
staon from the drop-down list.
3) Set the enrollment staon's IP address, port No., user name
and password.
4) Set the RF card type. The device can recognize the checked
card type.
5) Click OK.
8.
Enter the card No.
-
Enter the card number manually.
-
Place the card on the card enrollment staon and click Read
to get the card No. The card number will display in the Card
No.
eld automacally.
9.
Select the card type according to actual needs.
Normal Card
The card is used for opening doors for normal usage.
Duress Card
When the person is under duress, he/she can swipe the
duress card to open the door. The door will be unlocked and
the client will receive a duress event to
nofy the security
personnel.
Patrol Card
This card is used for the inspecon sta to check the their
aendance of inspecon. By swiping the card on the
specied card reader, the person is marked as on duty of
inspecon at that me.
Dismiss Card
By swiping the card on the card reader, it can stop the
buzzing of the card reader.
10.
Click Add.
11.
Conrm to add the person.
-
Click Add to add the person and close the Add Person
window.
12