User Manual

The edited basic informaon will be imported to the client
soware.
What to do next
Aer the basic informaon is imported to the client soware, you
should enroll other informaon such as the face, ngerprint, etc.
For details, see Enroll via Client Soware.
7 Basic Operaon
7.1 Login by Administrator
Login the device backend to set the device basic parameters. If an
administrator is added to the device, you can login by verifying
the administrator's permission.
Before You Start
Add an administrator and add a face picture for the administrator.
For details, see Add Administrator.
Steps
1.
Long tap on the
inial page for 3 s to enter the administrator
authencaon page.
Figure 7-1 Authencate Administrator Page
2.
Authencate the administrator's face to enter the home page.
Figure 7-2 Home Page
Note
The device will be locked for 30 minutes aer 5 failed face or
password aempts.
3.
Oponal: Tap and you can enter the added admin user
name and password to login.
4.
Oponal: Tap and you can exit the page and be back to the
inial page.
7.2 Add Administrator
The administrator can login the device backend and congure the
device parameters.
Steps
1.
Long tap on the
inial page for 3 s and login the device home
page.
2.
Tap Admin to enter the Administrator page.
14