User Manual

Figure 7-3 Administrator Page
3.
Set the administrator's parameters.
-
Edit the super administrator's parameters: Tap admin and
edit the super administrator's face and password.
-
Add a new administrator: Tap
and set the administrator's
type, add face and password.
Figure 7-4 Administrator Informaon Page
Super Administrator
Contains all management and operaon permissions.
Normal Administrator
Supports enrollment management and communicaon
management. During remote conguraon, the normal
administrator can only gain parameters.
4.
Tap
to save the sengs.
Note
•
By default, the system contains a super administrator
(admin). You cannot edit its No., name, and type. and you
cannot delete it.
•
The admin user has higher permission level than other
administrators.
•
The administrator's No. and name cannot be edited on the
device. You should
authencate the administrator before
eding the other administrator's informaon.
•
Up to 5 administrators can be added.
•
The face of the super administrator and normal
administrator cannot be the same.
7.3 Communicaon Sengs
Set the device wired network and wireless network.
Set Wired Network Parameters
Make sure the device has connected the Ethernet.
Long tap on the inial page for 3 s and login the home page. Tap
Comm. → Wired Network .
15