User Manual
Table Of Contents
- Legal Information
- Available Model
- Regulatory Information
- Safety Instruction
- 1 Overview
- 2 Appearance
- 3 Activation
- 4 Enroll Administrator's Face
- 5 Enroll via Device
- 6 Enroll via Client Software
- 7 Basic Operation
- A. Tips When Collecting/Comparing Face Picture
- B. Tips for Scanning Fingerprint
- C. Communication Matrix and Device Command
Figure 7-5 Set Wired Network
Set the device IP address, subnet mask, and gateway.
Set Wireless Network Parameters
The device can connect to the Ethernet via wireless connecon.
Long tap on the inial page for 3 s and login the home page. Tap
Comm. → Wi-Fi .
Figure 7-6 Wi-Fi Page
Aer enabling WLAN, you should select a Wi-Fi for connecon.
Select a Wi-Fi and enable DHCP and enter the Wi-Fi's password to
connect. Tap to connect the Wi-Fi.
Or disable the DHCP
funcon, and enter the Wi-Fi's password, IP
address, subnet mask, and gateway. Tap to connect the Wi-Fi.
Tap
to disconnect the Wi-Fi.
7.4 Manage Enrollment
You can view the enrolled person informaon and delete the
enrolled data.
Steps
1.
Long tap on the
inial page for 3 s and login the home page.
Tap Enrollment.
Figure 7-7 Enrollment Management Page
2.
You can view all enrolled person's informaon on this page.
3.
You can also perform the following
operaons.
Incomplete
Tap Incomplete and the system will list the
persons which have not enrolled all data.
View Details Tap a person in the list to view details. Tap
to delete the person and all enrolled
data.
Face/
Fingerprint/
Card
Tap a person in the list to enter the User
Informaon page. You can delete the
enrolled data according to actual
requirements.
16