User Manual
Table Of Contents
- Legal Information
- Available Model
- Regulatory Information
- Safety Instruction
- 1 Overview
- 2 Appearance
- 3 Activation
- 4 Enroll Administrator's Face
- 5 Enroll via Device
- 6 Enroll via Client Software
- 7 Basic Operation
- A. Tips When Collecting/Comparing Face Picture
- B. Tips for Scanning Fingerprint
- C. Communication Matrix and Device Command
Figure 7-11 Basic Sengs Page
White Light Brightness
Set the supplement white light's brightness. The brightness
range is from 1 to 100. 0 refers to turning
o the light. 1 refers
to the darkest, and 100 refers to the brightest.
IR Light Brightness
Set the IR light brightness when the IR light is enabled. The
brightness range is from 1 to 100. 0 refers to turning
o the
light. 1 refers to the darkest, and 100 refers to the brightest.
Video Standard
Set the video frame rate when performing live view remotely.
Aer changing the standard, you should reboot the device to
take
eect.
PAL
25 frames per second. Suitable for mainland China, Hong
Kong (China), the Middle East countries, Europe countries,
etc.
NTSC
30 frames per second. Suitable for the USA, Canada, Japan,
Taiwan (China), Korea, the Philippines, etc.
7.5.5 Set Biometric Parameters
You can customize the face parameters to improve the face
recognion performance. The congurable parameters includes
face an-spoong, liveness security level, pitch angle, yaw angle,
pupillary distance, and WDR.
Long tap on the inial page for 3 s and login the home page. Tap
Biometric.
Figure 7-12 Biometric Parameters Page
Table 7-1 Face Picture Parameters
Parameter Descripon
Face An-
Spoong
Enable or disable the face an-spoong
funcon. If enabling the funcon, the
device can recognize whether the person
is a live one or not.
19