User Manual
Table Of Contents
- Legal Information
- Available Model
- Regulatory Information
- Safety Instruction
- 1 Overview
- 2 Appearance
- 3 Activation
- 4 Enroll Administrator's Face
- 5 Enroll via Device
- 6 Enroll via Client Software
- 7 Basic Operation
- A. Tips When Collecting/Comparing Face Picture
- B. Tips for Scanning Fingerprint
- C. Communication Matrix and Device Command
Figure 7-13 Data Management Page
3.
Tap Export Template.
The template will be exported to the USB ash drive.
4.
Edit the exported table and enroll the user informaon.
Note
Make sure the edited le is saved in the folder named "DS-
K1F600" in the root directory of the USB ash drive.
5.
Tap Import User.
Note
Up to 2000 users can be imported.
Result
The system will read the user informaon in the USB ash drive
automacally and import the data to the device.
7.6.2 Export Enrolled Data
Export enrolled data from the device to the USB ash drive.
Before You Start
Plug the USB ash drive in the USB interface on the device.
Note
•
The supported USB ash drive format is FAT32.
•
The system supports the USB ash drive with the storage of 1G
to 32G. Make sure the free space of the USB ash drive is more
than 512M.
•
The exported user data is a DB
le, which cannot be edited.
Steps
1.
Long tap on the
inial page for 3 s and login the home page.
2.
Tap Data.
Figure 7-14 Data Management Page
3.
Tap Export Enrolled Data.
All enrolled data will be exported to the USB
ash drive.
7.6.3 Clear Enrolled Data
Delete all enrolled data in the device, including all face pictures,
ngerprints, card, etc.
21