DS-K1F820-F Fingerprint Recorder User Manual UD05957B-A
DS-K1F820-F Fingerprint Recorder·User Manual User Manual © 2017 Hangzhou Hikvision Digital Technology Co., Ltd. This manual is applied for DS-K1F820-F Fingerprint Recorder. It includes instructions on how to use the Product. The software embodied in the Product is governed by the user license agreement covering that Product. About this Manual This Manual is subject to domestic and international copyright protection. Hangzhou Hikvision Digital Technology Co., Ltd.
DS-K1F820-F Fingerprint Recorder·User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
DS-K1F820-F Fingerprint Recorder·User Manual 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.
DS-K1F820-F Fingerprint Recorder·User Manual All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value. Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard.
DS-K1F820-F Fingerprint Recorder·User Manual Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover.
DS-K1F820-F Fingerprint Recorder·User Manual Table of Contents 1 Overview ........................................................................................... 1 1.1 Introduction ...................................................................................... 1 1.2 Main Features ................................................................................... 1 2 Fingerprint Collection Description ...................................................... 2 2.1 Fingerprint Collection Progress ...
DS-K1F820-F Fingerprint Recorder·User Manual 1 Overview 1.1 Introduction Figure 1-1 DS-K1F820-F Fingerprint Recorder DS-K1F820-F Fingerprint Recorder supports living fingerprint registration, and identification. It can upload/download fingerprint characteristic data and image to the controller/ module. It supports the function of checking the completeness of registered fingerprint templates. 1.
DS-K1F820-F Fingerprint Recorder·User Manual 2 Fingerprint Collection Description 2.1 Fingerprint Collection Progress You can collect fingerprint with the following steps Before you start: You should install iVMS-4200 Control Client from the company website and run the client. Steps: 1. Plug the wiring of USB into the USB interface of PC directly. Figure 2-1 USB Interface Connection Notes: The picture is only for reference. Please refer to the actual products.
DS-K1F820-F Fingerprint Recorder·User Manual When the fingerprint recorder is identified by the PC, the item “HID-compliant device” or “USB Input Device” will display in the computer control panel of PC. Figure 2-2 Computer Control Panel 2. Place the device on the desk. 3. Login the iVMS-4200 control client. 4. Enter the access control panel and click Selecting Modules to select access control.
DS-K1F820-F Fingerprint Recorder·User Manual 5. Click to enter the Access Control module. 6. Click tab to enter the Person and Card Management interface. Figure 2-4 Person and Card Management interface 7. Add an organization. 1) In the organization list on the left, you should add a top organization as the parent organization of all organizations. 2) Click Add button to pop up the adding organization interface. Figure 2-5 Add Organization Window 3) Input the Organization Name as desired.
DS-K1F820-F Fingerprint Recorder·User Manual Figure 2-6 Fingerprint Tab 3) Select the Collection Mode as Local Collection. 4) Click Set Fingerprint Machine to enter the following dialog box. Figure 2-7 Select Fingerprint Window 5) Select DS-K1F820-F as the device type. 6) Click Save button to save the settings. 7) (Optional) You can click Restore Default Value button to restore the default settings. 9. Start collecting.
DS-K1F820-F Fingerprint Recorder·User Manual Note: If the collected fingerprint picture is not clear, you should try another. You can collect the fingerprint picture for no more than 4 times. 3) Click OK to save the fingerprint picture. 2.2 Fingerprint Collection Method The place of finger affects the fingerprint information collected a lot because of the area sensor used in the fingerprint reader. The following are some tips for fingerprint collection.
DS-K1F820-F Fingerprint Recorder·User Manual Vertical Edge I Side Edge II Environment The scanner should avoid direct high light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again after drying the finger. Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods.
DS-K1F820-F Fingerprint Recorder·User Manual 3 Points of Attentions In order to acquire high quality of fingerprint information, we hope users notice the tips below in the using process. Properly Protect Fingerprint Sensor Fingerprint sensor is the key component for image capture, and damage on the sensor will directly affect the quality of the fingerprint image. Please keep it from crash with any hard object. Keep Finger Clean If the fingers are dirty, please wash the hands.
