Quick Start Guide
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Installation
- 4 Terminal Connection
- 5 Wiring Description
- 6 Activating Access Control Terminal
- 7 Basic Operation
- Appendix: Tips for Scanning Fingerprint
Access Control TerminalยทQuick Start Guide
8
3 Installation
Make sure that the wall is strong enough to withstand three times the weight of the device.
Installation of DS-K1T105 Series Device 3.1
Steps:
1. Install the 86 gang box into the wall.
Figure 3-1 Install 86 Gang Box
2. Secure the device mounting plate on the gang box with two srews (supplied).
Figure 3-2 Secure Mounting Plate
3. Align the terminal with mounting plate.
4. Buckle the terminal on the plate.