Quick Start Guide
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Installation
- 4 Terminal Connection
- 5 Wiring Description
- 6 Activating Access Control Terminal
- 7 Basic Operation
- Appendix: Tips for Scanning Fingerprint
Access Control TerminalยทQuick Start Guide
9
Figure 3-3 Buckle on Plate
5. Tigten the srew to fix the terminal on the mounting plate and complete the installation.
Figure 3-4 Tighten Screw
Installation of DS-K1T200/201 Series Device 3.2
Steps:
1. Install the 86 gang box into the wall.
Figure 3-5 Install 86 Gang Box
2. Secure the device mounting plate on the gang box with two srews (supplied).