Quick Start Guide
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Installation
- 4 Terminal Connection
- 5 Wiring Description
- 6 Activating Access Control Terminal
- 7 Basic Operation
- Appendix: Tips for Scanning Fingerprint
Access Control Terminal·Quick Start Guide
14
The Wiring of External Card Reader 5.2
The Wiring of External RS-485 Card Reader 5.2.1
Figure 5-2 External RS-485 Card Reader Connection Diagram
The Wiring of External Wiegand Card Reader 5.2.2
Figure 5-3 External Wiegand Card Reader Connection Diagram
Set the dial-up of the external card reader as 2 when connected to the access control
terminal.
The external power supply and the access control terminal should use the same GND cable.