Quick Start Guide
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Installation
- 4 Terminal Connection
- 5 Wiring Description
- 6 Activating Access Control Terminal
- 7 Basic Operation
- Appendix: Tips for Scanning Fingerprint
Access Control TerminalยทQuick Start Guide
17
The Wiring of External Alarm Device 5.6
Figure 5-8 The Installation Diagram of External Alarm Device
Card Reader Connection 5.7
The access control terminal can be switched into the card reader mode. It can access to the access
control as a card reader, and supports Wiegand communication port and RS-485 communication
port.
When the access control terminal works as a card reader, it only supports being connected to the
controller, but does not support alarm input or output, or the connection of external devices.
5.7.1 The Wiring of Wiegand
Figure 5-9 Access Control Terminal Wiegand Connection Diagram