Quick Start Guide
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Installation
- 4 Terminal Connection
- 5 Wiring Description
- 6 Activating Access Control Terminal
- 7 Basic Operation
- Appendix: Tips for Scanning Fingerprint
Access Control TerminalยทQuick Start Guide
24
7 Basic Operation
Before You Start:
You should activate the device before the first login. Otherwise, after powered on, the system will
switch into the Device Activation interface. For detailed information about activation, see Chapter
6 Activating Access Control Terminal.
The working flow is as follows:
Steps:
1. Power on the device to enter the initial interface.
Figure 7-1 Initial Interface
2. Long-tap the # key for 3s to enter the password authentication interface.
Figure 7-2 Password Authentication Interface