Quick Start Guide

Access Control Terminal·Quick Start Guide
32
Figure 7-15 Wiegand Settings Interface
3. Edit parameters of the serial port, including the Wiegand direction and the Wiegand mode.
Wiegand Direction:
1) In the terminal mode, select whether to Receive or to Send. In the
Receive mode, the mode is self-adaptive and the mode cannot be
edited.
2) In the card reader mode, only Send is supported.
Wiegand Mode:
The default Wiegand mode is Wigand 34
 Tap the key to enter and exit the editing mode.
 Tap the Right/Left direction keys to choose contents.
 Tap the # key to switch the mode between “Yes” mode and “No” mode.
4. Move the cursor to the OK button, and tap the # key.
Reboot the device after changing the Direction.
7.3.4 Wi-Fi Settings
Steps:
1. Move the cursor to Wi-Fi (Wi-Fi settings) by using direction keys on the communication settings
interface.
2. Tap the # key to enter the Wi-Fi settings interface.
Figure 7-16 Wi-Fi Enabling
3. Move the cursor to and tap the # key to enable the WLAN.