Quick Start Guide

Access Control Terminal·Quick Start Guide
34
Figure 7-19 System Settings Interface
System Parameters:
System parameters of the device include the device running mode, login
password, and prompt sound.
Data Management:
It is used to manage the storage data of the device, including Delete Card
Parameters, Delete Event Only, and Delete Picture Only.
Restore Settings:
The device can be restored into factory defaults or default settings.
Access Control
Settings:
You can set parameters of the access control terminal, including Controller
Authentication, Card Reader Authentication, Door Action Time, Delayed
Door Alarm, and Anti-passing Back.
Camera Settings:
You can set the camera for the access control terminal (only supported by
terminal with the model of -C).
Camera Settings will be displayed on the screen when the access control terminal has the function.
7.4.1 Setting System
Steps:
1. Move the cursor to System (system parameters) by using direction keys on the system settings
interface.
2. Tap the # key to enter the system parameters interface.
Figure 7-20 System Parameters Interface
3. Modify system parameters, including switching the mode, entering the login password, and
enabling voice prompts.
Mode:
The device mode can be switched between Controller and Card Reader.
After switching the mode, the system can automatically reboot and enter