Quick Start Guide

Access Control Terminal·Quick Start Guide
39
Figure 7-25 Time Settings Interface
3. Edit time parameters.
Date/Time: Edit the data and the time of the device.
DST (Daylight Saving Time): When enabling DST, you should set the bias time, the start time,
and the end time of DST.
 Tap the key to enter and exit the editing mode.
 Tap the Right/Left direction keys to choose contents.
 Tap the # key to switch the mode between “Yes” mode and “No” mode.
4. Move the cursor to the OK button, and tap the # key.
Upload/Download Settings 7.6
Purpose:
On the upload/download interface, you can upgrade the device, upload the door parameters,
download access parameters, download captured pictures, and download attendance record.
Steps:
1. Plug a USB disk into the access control terminal.
2. Move the cursor to Transfer (upload/download) by using direction keys.
3. Tap the # key to enter the upload/download interface.
Figure 7-26 Upload/Download Interface
4. Move the cursor to Device Upgrade, Upload Access Settings, Download Access Settings,
Download Attendance Record, or Download Captured Picture.
Upgrade Device:
The system can automatically read the upgrading