Quick Start Guide

Access Control Terminal·Quick Start Guide
40
information from the USB, and upgrade the device.
The upgrading file should be put in the root directory.
Upload ACS Settings:
The system can automatically read the access parameters
from the USB, and upload them to the device.
Download ACS Settings:
The system can automatically download access parameters
into the USB.
Download Attendance Record:
The system can automatically download attendance records
into the USB.
Download Captured Picture:
The system can automatically download captured pictures
into the USB. Click the # key.
The supported USB format is FAT32.
Testing 7.7
Purpose:
On the test interface, you can do voice test, keypad test, RTC test, and camera test.
Steps:
1. Move the cursor to Test by using direction keys.
2. Tap the # key to enter the test interface.
Figure 7-27 Test Interface
3. Move the cursor to select Voice Test, Keypad Test, RTC Test, or Camera Test to do
corresponding test.
Voice Test:
You can hear a voice prompt “Voice prompt succeeds” after click the # key.
Keypad Test:
On the keypad test interface, if the keypad test succeeds, the screen will
display corresponding numbers or functions of the keypad you click.
RTC Test:
On the RTC test interface, if the test succeeds, the screen will display the
synchronization time.
Camera Test:
On the camera test, if the camera test succeeds, the screen will display the
real-time picture the camera captures.
This function is only supported by terminal with the model of –C.