User Manual

Access Control Terminal·User Manual
104
 For each access control point (door), up to 20 authentication groups can be added.
 For the authentication group which certificate type is Local Authentication, up to 8 card
groups can be added to the authentication group.
 For the authentication group which certificate type is Local Authentication and Super
Password or Local Authentication and Remotely Open Door, up to 7 card groups can be
added to the authentication group.
8.9.4 Open Door with First Card
Purpose:
You can set multiple first cards for one access control point. After the first card swiping, it allows
multiple persons access the door or other authentication actions. The first card mode contains
Remain Open with First Card, and Disable Remain Open with First Card.
 Remain Open with First Card: The door remains open for the configured time duration after
the first card swiping until the remain open duration ends.
 Disable Remain Open with First Card: Disable the function.
Notes:
 The first card authorization is effective only on the current day. The authorization will be
expired after 24:00 on the current day.
 You can swipe the first card again to disable the first card mode.
Steps:
1. Click Open Door with First Card tab to enter the following interface.
2. Select an access control device from the list on the left.
3. Select the first card mode in the drop-down list for the access control point.
4. (Optional) If you select Remain Open with First Card, you should set remain open duration.