User Manual

Access Control Terminal·User Manual
25
1) Tap the key (Edit key) to enter the editing mode.
2) Tap F1 key to switch the input method.
3) Enter the (activation) password into the textbox.
4) Tap the key to exit the editing mode.
4. Tap the # key to confirm the settings. The system will enter the menu operation interface.
On the menu operation interface, you can manage users, set communication parameters, set
system parameters, and so on.
Note: In the initial interface, the icon , , , and on the upper-right corner represents
network is online, network is armed, EHome is online, and Wi-Fi is connected respectively. If there
is on the first three icons, it represents network is offline, network is not armed, and EHome is
offline respectively. When the Wi-Fi is not connected, the Wi-Fi icon will have no color inside.
7.1 User Management
Purpose:
On the user management interface, you can add and manage users.
Use the Up, Down, Left, Right key to move the cursor to User (user management) by using the
direction keys.
Tap the # key to enter the User interface.
7.1.1 Adding User
Purpose: