User Manual

Access Control Terminal·User Manual
30
Network Settings:
It refers to network parameters of the device, including IP address,
subnet mask, and gateway address.
Serial Port Settings:
When the access control terminal works as a RS-485 card reader, serial
port parameters include working mode, Baud Rate, and RS-485 address.
Wiegand Settings:
When the access control terminal works as a Wiegand card reader,
Wiegand parameters involve the Wiegand direction, and the Wiegand
mode.
Wi-Fi:
You can enable the Wi-Fi function.
7.2.3 Network Settings
Purpose:
On the network settings interface, you can set network parameters of the device.
Steps:
1. Move the cursor to Network (network settings) by using direction keys.
2. Tap the # key to enter the network settings interface.
3. Modify network parameters of the device, including IP address, subnet mask, and gateway
address.
Note: Tap the key to enter/exit the editing mode.
4. Move the cursor to the OK button, and tap the # key.