User Manual

Access Control Terminal·User Manual
34
Steps:
1. Move the cursor to System (system parameters) by using direction keys.
2. Tap the # key to enter the system parameters interface.
System Parameters:
System parameters of the device include the device running mode, login
password, and prompt sound.
Data Management:
It is used to manage the storage data of the device, including Delete Card
Parameters, Delete Event Only, and Delete Picture Only.
Restore Settings:
The device can be restored into factory defaults or default settings.
Access Control
Settings:
You can set parameters of the access control terminal, including Controller
Authentication, Card Reader Authentication, Door Action Time, Delayed
Door Alarm, and Anti-passing Back.
Camera Settings:
You can set the camera for the access control terminal (only supported by
terminal with the model of -C).
Note: Camera Settings will be displayed on the screen when the access control terminal has the
function.
7.3.1 Setting System
Steps:
1. Move the cursor to System (system parameters) by using direction keys on the system settings
interface.
2. Tap the # key to enter the system parameters interface.