User Manual

Access Control Terminal·User Manual
38
On the camera settings interface, you can set camera parameters.
Note: This function is only supported by terminal with the model of –C.
Steps:
1. Move the cursor to Camera (camera settings) by using direction keys in the system settings
Interface.
2. Tap the # key to enter the camera settings interface.
3. Edit camera parameters.
Enable Face Detection:
If enabling face detection, the device should detect the face when
authenticating. Or authentication will be failed.
Overlay User Info. on
Picture:
When enabling card No. overlay, captured pictures can be overlaid
on the card information.
Display Detected Face
Picture:
When enabling to display the picture, captured pictures can display
on the screen.
Enable QR Code
Authentication:
You can authenticate via QR code. When enabling the function,
long-press the F1 key to enter the QR code authentication mode.
Place the QR code picture in front of the device camera to
authenticate.
Note:
 You can generate the card QR code when adding the card to
the person. For details, see Adding User (Card) in User Manual
of iVMS-4200 Client Software.
 The function should be supported by the device with camera.
Notes:
 Tap the key to enter and exit the editing mode.
 Tap the Right/Left direction keys to choose contents.
 Tap the # key to switch the mode between “Yes” mode and “No” mode.
 The captured pictures can be saved in the SD card.
4. Move the cursor to the OK button, and tap the # key.
7.4 Time Settings
Steps:
1. Move the cursor to Time (time settings) by using direction keys.
2. Tap the # key to enter the time settings interface.