User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Appearance
- Chapter 3 Installation
- Chapter 4 Terminal Connection
- Chapter 5 Wiring Description
- Chapter 6 Activating Access Control Terminal
- Chapter 7 Basic Operation
- Chapter 8 Client Operation
- 8.1 Function Module
- 8.2 User Registration and Login
- 8.3 System Configuration
- 8.4 Access Control Management
- 8.4.1 Adding Access Control Device
- 8.4.2 Viewing Device Status
- 8.4.3 Editing Basic Information
- 8.4.4 Network Settings
- 8.4.5 Capture Settings
- 8.4.6 RS-485 Settings
- 8.4.7 Wiegand Settings
- 8.4.8 Authenticating M1 Card Encryption
- 8.4.9 Remote Configuration
- Checking Device Information
- Editing Device Name
- Editing Time
- Setting System Maintenance
- Managing User
- Setting Security
- Configuring Network Parameters
- Configuring Upload Method
- Configuring Network Center
- Configuring Advanced Network
- Configuring Wi-Fi
- Configuring Relay Parameters
- Configuring Access Control Parameters
- Uploading Background Picture
- Configuring Face Detection Parameters
- Operating Relay
- Viewing Relay Status
- 8.5 Organization Management
- 8.6 Person Management
- 8.7 Schedule and Template
- 8.8 Permission Configuration
- 8.9 Advanced Functions
- 8.10 Searching Access Control Event
- 8.11 Access Control Event Configuration
- 8.12 Door Status Management
- 8.13 Arming Control
- 8.14 Time and Attendance
- Appendix A Tips for Scanning Fingerprint
- Appendix B Custom Wiegand Rule Descriptions
Access Control Terminal·User Manual
41
3. Enter the card number.
Enter the card number by swiping the card.
Place the card close to the screen.
Input the card number manually.
4. Set the start/end time.
Tap the key to enter and exit the editing mode.
5. Move the cursor to the OK button, and tap the # key.
Note: On the log query display interface, you can view the card number, swiping time, and card
reader ID.
7.8 System Information
Steps:
1. Move the cursor to Info (system information) by using direction keys.
2. Tap the # key to enter the system information interface.
3. Move the cursor to Record Capacity or Information by using Left/Right direction keys.
Record Capacity
Card Capacity:
It refers to the maximum amount of cards.
Note: The default maximum card amount is 100,000.
Fingerprint Capacity:
It refers to the maximum amount of fingerprints.
Notes:
Fingerprint capacity only supports devices with fingerprint
registration function.
The default maximum fingerprint amounts of devices with