User Manual

Access Control Terminal·User Manual
64
Note: The interface may different from the picture displayed above. Refer to the actual interface
when adopting this function.
 Door Status: The status of the connected door.
 Host Status: The status of the host, including Storage Battery Power Voltage, Device Power
Supply Status, Multi-door Interlocking Status, Anti-passing Back Status, and Host Anti-Tamper
Status.
 Card Reader Status: The status of card reader.
 Note: If you use the card reader with RS-485 connection, you can view the status of online or
offline. If you use the card reader with Wiegand connection, you can view the status of offline.
 Alarm Output Status: The alarm output status of each port.
 Event Sensor Status: The event sensor status of each port.
 Secure Door Control Unit Status: The online status and tamper status of the Secure Door
Control Unit.
 Arming Status: The status of the device.
8.4.3 Editing Basic Information
Purpose:
After adding the access control device, you can edit the device basic information.
Steps:
1. Select the device in the device list.
2. Click Modify to pop up the modifying device information window.
3. Click Basic Information tab to enter the Basic Information interface.