User Manual

8.5.14 Customize Audio Content
Customize the output audio content when authencaon succeeded and failed.
Steps
1. Click
Conguraon → Video/Audio → Audio Prompt .
Figure 8-9 Customize Audio Content
2. set the appellaon.
3. Enable the funcon.
4. Set the me duraon when authencaon succeeded.
1) Click Add.
2) Set the
me duraon and the language.
Note
If authencaon is succeeded in the congured me duraon, the device will broadcast the
congured content.
3) Enter the audio content.
4) Oponal: Repeat substep 1 to 3.
5)
Oponal: Click to delete the congured me duraon.
5. Set the me duraon when authencaon failed.
1) Click Add.
2) Set the
me duraon and the language.
Face Recognion Terminal User Manual
75