User Manual

Call Specied Room No.
You should set a room No. When you tap the call buon on the authencaon page, you
can call the congured room directly without dialing.
Theme
You can set Theme as Default/Simple.
Voice
Sengs
You can enable/disable the voice prompt funcon and adjust the voice volume.
Note
You can set the voice volume between 0 and 10.
Time Sengs
Set the me zone, the device me and the DST.
Select Language
Select the language according to actual needs.
Supplement Light Sengs
Tap White Light and you can set the supplement light mode. You can select to enable or disable
the supplement light, or customize the supplement light's brightness, start me, and end me.
Community No.
Set the device installed community No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
7.7 Set Biometric Parameters
You can customize the face parameters to improve the face recognion performance. The
congurable parameters includes applicaon mode, face liveness level, face recognion distance,
face
recognion interval, wide dynamic, face 1:N security level, face 1:1 security level, ECO
sengs, hard hat detecon level, and face with mask detecon.
Long tap on the inial page for 3 s and login the home page. Tap Biometric.
DS-K1TA70 Series Face Recognion Terminal User Manual
45