Quick Start Guide
NO
LED-A
LED1
LED2
LED-B
LED-C
LED-D
NC
NO
NC
RS-485
Communication
Indicator
Alarm Output
Indicator
Battery Charging Indicator
Running Indicator
DIP Switch
Charging Completed Indicator
Power Indicator
Network Data Indicator
Network Status Indicator
Alarm Input
Network
Interface
Door Contact Input Exit Button
Event Input Event Input
Lock1 Lock2 Lock3 Lock4
NORMAL INITIAL
Z4
D1+
D1-
D2+
D2-
D3+
D3-
D4+
D4-
S1
B1
GND
B2
B3
GND
B4
C8
+12 V
GND
BAT+
BAT-
RS-485A+
RS-485A-
GND
RS-485B+
RS-485B-
GND
RS-485C+
RS-485C-
GND
RS-485D+
RS-485D-
GND
NO/NC1
COM1
NO/NC2
COM2
NO/NC3
COM3
NO/NC4
COM4
GND
+12V
GND
+12V
GND
W0
W1
BZ
ERR
OK
GND
W0
W1
BZ
ERR
OK
GND
W0
W1
BZ
ERR
OK
GND
W0
W1
BZ
ERR
OK
GND
C7
C6
GND
C5
C4
GND
C3
C2
GND
C1
GND
S2
S3
GND
S4
GND
Z3
Z2
GND
Z1
Lock
Power
Reader
Power
Wiegand Reader 4 Wiegand Reader 3 Wiegand Reader 1Wiegand Reader 2
Power
Supply
Battery
RS-485 Reader
Uplink RS-485 Alarm Output
DS-K2600 Series
Access Controller
Quick Start Guide
UD05848B-D
COPYRIGHT ©2019 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties
of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be
reproduced, changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any
warranties, guarantees or representations, express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images
and all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website (http://overseas.hikvi-
sion.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in
various jurisdictions. Other trademarks and logos mentioned below are the properties of their
respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE
CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS
PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
Data Protection
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example, for
device with facial recognition features, biometrics data is stored in your device with encryption
method; for fingerprint device, only fingerprint template will be saved, which is impossible to
reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with
the applicable data protection laws and regulations, including without limitation, conducting
security controls to safeguard personal data, such as, implementing reasonable administrative
and physical security controls, conduct periodic reviews and assessments of the effectiveness of
your security controls.
Brown
Orange
Purple
White
Green
Black
Card ReaderCard ReaderCard ReaderCard Reader
Cathode Lock
Anode Lock
Door Contact1 Door Contact2
Exit Button3
Exit Button4
2.2 KΩ
NO
COM
External Anti-Theft Detector
Normally
Open
Normally
Closed
NC
COM
External Anti-Theft Detector
2.2 KΩ
Alarm Relay
Alarm Relay
+12 V External
Power Supply
+12 V External
Power Supply
RS-485+
Yellow
RS-485-
Blue
RS-485+
Yellow
RS-485-
Blue
RS-485+
Yellow
RS-485-
Blue
RS-485+
Yellow
RS-485-
Blue
Card Reader
Card Reader
Card Reader
Card Reader
+12V GND RS485+ RS485- Lock1+ Lock1-
Door
Contact1
Exit
Button1 GND
Door
Contact2
Exit
Button2 Lock2+ Lock2- Lock3+ Lock3-
Door
Contact3 GND
Door
Contact4
Exit
Button4 Lock4+ Lock4-
Exit
Button3
FIRE
Emergency Break Glass
PRESS HEREPRESS HERE
Fire Alarm Interface
Note: After wiring RS-485
card readers, you should set
Bit 6 of the card reader DIP
switch to OFF and set Bit 1 to
4 as the DIP address. DIP
address of Door 1 (Entrance) is
1 (decimal value), Door 1 (Exit)
is 2, Door 2 (Entrance) is 3,
Door 2 (Exit) is 4, Door 3
(Entrance) is 5, Door 3 (Exit) is
6, Door 4 (Entrance) is 7, and
Door 4 (Exit) is 8.
Notes:
JP11
Brown
Orange
Purple
White
Green
Black
Brown
Orange
Purple
White
Green
Black
Brown
Orange
Purple
White
Green
Black
1
Wiring of Four-Door Access Controller
After wiringthe Wiegand card readers, set Bit 6 of the
card reader DIP switch to ON and set Bit 7 to select a
Wiegand protocol.
If setting Bit 7 as ON, it refers to Wiegand 26 protocol. If
setting Bit 7 as OFF, it refers to Wiegand 34 protocol.
For four-door access controller, Wiegand reader 1, 2, 3,
and 4 represent Door 1, 2, 3, and 4 respectively.
For two-door access controller, Wiegand reader 1, 2, 3,
and 4 represent Door 1 (Entrance), Door 1 (Exit), Door 2
(Entrance) and Door 2 (Exit) respectively.
For single door access controller, Wiegand reader 1 and 2
represent Door 1 (Entrance) and Door 2 (Exit) respectively.
Scan the QR code to get the user manual for detailed information.
Note that mobile data charges may apply if Wi-Fi is unavailable.