Quick Start Guide

Video Intercom Door Station·Quick Start Guide
28
4.3 Edit Network Parameters
Purpose:
Network connection is mandatory for the use of door station.
Steps:
1. Go to the configuration mode.
1) Hold down the * key and the # key for 2s to enter the admin password interface.
2) Enter the admin password, and press the # key.
Figure 4-3 Admin Password Interface
The default admin password is 888999.
2. Enter the network parameters settings interface.
1) Press the numeric keys 4 and 6 to switch to the network configuration interface.
Figure 4-4 Network Configuration Interface
2) Press the # key to enter the network parameters settings interface.
With the private SIP protocol, you should set IP address, sub mask, gateway, SIP IP,
master IP, and center IP for the door station.