User Manual

Video Intercom Door Station·User Manual
38
6.4.8 Open Source Software Licenses
On the settings interface, press numeric keys 4 and 6 to switch to the Open Source
Software interface, and press the # key to open source software licenses of the device.
6.5 Call Resident
You can call residents via the door station no matter the door station is in the network
intercom system or the analog intercom system.
The door station can work as main/sub door station, and outer door station, which
correspond to different calling resident modes respectively.
Work as Main/Sub Door Station
Steps:
1. Enter the calling No.
With the private SIP protocol, the calling No. should be the room No. of the indoor
station.
With the standard SIP protocol, the calling No. should be the VoIP phone No. of the
indoor station. And you must make sure that the indoor station supports the
standard SIP protocol.
2. Press the # key or the key to start calling the resident.
Work as Outer Door Station
Steps:
1. Enter the calling No.
With the private SIP protocol, the calling No. should be the community No. and the #
key, the Building No. and the # key, the Unit No. and the # key, and the Room No. and
the # key.