User Manual
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Typical Application
- 4 Terminal and Wiring
- 5 Installation
- 6 Local Operation
- 7 Remote Operation via Batch Configuration Tool
- 8 Remote Operation via iVMS-4200
- Appendix
Video Intercom Door StationยทUser Manual
62
7.5.2 Set Main/Sub Door Station
Set Main Door Station
Purpose:
You can activate the online main door station, and configure the building No. for the
online main door station.
Steps:
1. Select the community, and press the Main Door Station tab to switch to the main
door station configuration interface.
2. Select the door station type from the drop-down list menu: Door Station for Unit, or
Door Station for Villa.
3. Enter the main door station start IP address, set the main door station floor No., and
then click the Calculate button to generate the main door station end IP address and
main door station No. (like 1-1-1) automatically.
4. Set the linked network parameters for the main door station: SIP IP address, master
station IP address, center IP address, center port No., subnet mask, and gateway
address.
5. Select an online door station, enter the login password, and click the Set button.