Configuration Manual

Figure 1-20 Dial (Standard SIP)
2.
Enter the room No. of the indoor staon that the door staon connected to.
3.
Click Save to enable the sengs.
Note
By default, quick press the call buon, the door staon calls resident. If you
check Quick Press for Calling Center, the door staon calls the management
center when quick press the call buon of the main unit.
1.6.8 Moon Detecon
Steps
1.
Click Moon Detecon to enter the moon detecon page.
Figure 1-21 Moon Detecon
Module Door
Staon Conguraon Guide
15