Configuration Manual

3.
Click Save.
Note
The module address is used to dierenate the sub modules. See Congure
Sub Module Address for detailed conguraon instrucons.
For the other sub modules (indicator module, keypad module, display
module and card reader module), it prompts Not supported.
Figure 1-23 Conguring Sub Module Informaon
The room No. for the main unit's call buon is 1 by default; and the room
No. for the nametag modules call buons are 2 to 7 by default.
1.7
Congure Video Intercom Network
You need to congure video intercom network parameters in the network module.
Click Network in the remote conguraon interface, to congure the local network,
linked network and FTP
sengs.
Module Door
Staon Conguraon Guide
17