Configuration Manual

Figure 1-26 FTP Sengs
2.
Enable Enable Main FTP.
3.
Select IP address from the drop-down list of server mode.
4.
Enter the FTP server address, and port No.
5.
Oponal: Enable the anonymity.
6.
Enter the name and password.
7.
Select the directory structure and set the separator, naming item, and naming
element.
8.
Click Save to enable the
sengs.
Note
•
The default port No. is 21.
•
To enable anonymity or not is according to whether the FTP server enables
anonymity.
1.7.4 Advanced Sengs
Steps
1.
Click Advanced
Sengs to enter the advanced network sengs page.
Module Door
Staon Conguraon Guide
20