Configuration Manual

Steps
1.
In the Informaon Search page, click Unlocking Log to enter the Unlocking Log
page.
Figure 2-5 Unlocking Logs
2.
Set the search condions, including unlocking type, device type, start me and
end me.
Unlocking Type
Click ˅ to unfold the drop-down list and select the unlocking type as Unlock
by Password, Unlock by Duress, Unlock by Card, Unlock by Resident or
Unlock by Center. Or select All to search logs with all unlocking types.
Device Type
Click ˅ to unfold the drop-down list and select the device type as Door
Staon or Door Staon (V Series). Or select All Devices to search logs with
all device types.
Start Time/End Time
Click to specify the start me and end me of a me period to search the
logs.
`Reset the
Sengs Click Reset` to reset all the congured search
condions.
3.
Click Search and all the matched unlocking logs will display on the page.
4.
Oponal: Check the detailed informaon of searched unlocking logs, such as
unlocked me, card No., device No., etc.
5.
Oponal: Input keywords in the Search eld to lter the searching result.
Module Door
Staon Conguraon Guide
41