Configuration Manual

1 Device Conguraon
1.1 Acvate Device
You can only congure and operate the door staon aer creang a password for
the device acvaon.
Default parameters of door staon are as follows:
•
Default IP Address: 192.0.0.65.
•
Default Port No.: 8000.
•
Default User Name: admin.
Steps
1.
Run the client soware, enter Device Management, check the Online Device
area.
2.
Select an
inacvated device and click the Acvate.
Figure 1-1 Online Device Area
3.
Create a password, and
conrm the password.
Figure 1-2 Acvate Device
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case leers, lower case leers, numbers, and special
Module Door Staon Conguraon Guide
1