User Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Regulatory Information
- 1 Terminal and Wiring
- 2 Installation
- 3 Activation
- 4 Remote Configuration via Web
- 4.1 Live View
- 4.2 User Management
- 4.3 Number Settings
- 4.4 Device Management
- 4.5 Parameters Settings
- 5 Configuration via Client Software
- A. Communication Matrix and Device Command
7.
Set the picture naming rules.
8.
Click Save to enable the sengs.
Plaorm Access
Plaorm access provides you an opon to manage the devices via plaorm.
Steps
1.
Click Network → Advanced
Sengs → Plaorm Access to enter the sengs
page.
2.
Check the checkbox of Enable to enable the
funcon.
3.
Select the
Plaorm Access Mode.
Note
Hik-Connect is an applicaon for mobile devices. With the App, you can view live
image of the device, receive alarm nocaon and so on.
4.
Create a Stream Encrypon/Encrypon for the device.
Note
6 to 12 leers (a to z, A to Z) or numbers (0 to 9), case sensive. You are
recommended to use a combinaon of no less than 8 leers or numbers.
5.
Click Save to enable the
sengs.
4.5.4 Video & Audio
Sengs
Video Parameters
Steps
1.
Click Video/Audio → Video to enter the sengs page.
Module Door
Staon User Manual
64