User Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Regulatory Information
- 1 Terminal and Wiring
- 2 Installation
- 3 Activation
- 4 Remote Configuration via Web
- 4.1 Live View
- 4.2 User Management
- 4.3 Number Settings
- 4.4 Device Management
- 4.5 Parameters Settings
- 5 Configuration via Client Software
- A. Communication Matrix and Device Command
Figure 4-12 Backlight
1) Check the checkbox to enable BLC.
2) Select BLC Area.
6.
Click Save to enable the
sengs.
OSD Sengs
You can customize the camera name, me/date format, display mode, and OSD size
displayed on the live view.
Steps
1.
Click Image → OSD Sengs to enter the sengs page.
2.
Check the corresponding checkbox to select the display of camera name, date or
week if required.
3.
Edit the Camera Name.
4.
Select from the drop-down list to set the Time Format and Date Format.
5.
Adjust the OSD
posion.
6.
Click Save to enable the sengs.
Target Cropping
Module Door Staon User Manual
69