User Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Regulatory Information
- 1 Terminal and Wiring
- 2 Installation
- 3 Activation
- 4 Remote Configuration via Web
- 4.1 Live View
- 4.2 User Management
- 4.3 Number Settings
- 4.4 Device Management
- 4.5 Parameters Settings
- 5 Configuration via Client Software
- A. Communication Matrix and Device Command
Device ID Conguraon
Steps
1.
Click Device ID Sengs to enter the page.
Figure 4-15 Device ID Sengs
2.
Select the device type from the drop-down list, and set the corresponding
informaon.
3.
Click Save to enable the device number conguraon.
Note
•
For main door staon (D series or V series), the serial No. is 0.
•
For sub door staon (D series or V series), the serial No. cannot be 0. Serial
No. ranges from 1 to 99.
•
For each villa or building, at least one main door staon (D series or V series)
should be
congured, and one sub door staons (D series or V series) can be
customized.
•
For one main door staon (D series or V series), up to 8 sub door staons
can be congured.
Linked Network Sengs
Steps
1.
Go to Intercom → Session
Sengs to enter the sengs page.
2.
Set Register Number and
Registraon Password.
3.
Set Main Staon IP and VideoIntercom Server IP.
Module Door
Staon User Manual
74