Operation Manual

Video Intercom Indoor Station·User Manual
81
4. Click Storage Server on the list to enter the Storage Server Adding interface.
For adding the storage server, please refer to 9.2.1 Adding Video Intercom Devices, or
User Manual of iVMS-4200 (Video Intercom) V2.4.2 in the disk.
9.4.2 Formatting the HDDs
The HDDs of the storage server need to be formatted for the captured picture storage.
Steps:
1. Select the added storage server from the list and click Remote Config.
2. Click Storage->General to enter the HDD Formatting interface.
3. Select the HDD from the list and click Format. You can check the formatting process
from the process bar and the status of the formatted HDD changes from Unformatted
to Normal Status.
Figure 9-9 Formatting HDDs
Formatting the HDDs is to pre-allocate the disk space for storage and the original data of
the formatted HDDs will be deleted.