Configuration Manual

Figure 1-5 Set Indoor Staon Informaon
3.
Select Indoor Staon Type from Indoor Staon or Indoor Extension according to
your actual needs.
-
Indoor
Staon: You can set the indoor staon's room informaon, including
the room name, community No., building No., Unit No., oor, and room No.,
the live view duraon, the SIP register password, and the SIP parameters.
-
Indoor Extension: You can set the indoor extension's room informaon,
including the room name and the extension No., live view duraon, and the
SIP register password.
4.
Tap Room
Informaon and set room name, community No., building No., unit
No., oor No., and room No. according to your actual needs.
1.2.4 SIP
Sengs
Devices can communicate with each other via SIP protocol. You create set the SIP
register password, enable standard SIP and set VIOP account.
Steps
1.
Tap Sengs → → Conguraon , and enter admin (acvaon) password.
2.
Set SIP register password.
1) Tap SIP register password.
2) Create a new SIP register password and
conrm the password.
3) Tap OK.
3.
Oponal: Enable standard SIP.
1) Tap SIP
Sengs.
Network Indoor
Staon Conguraon Guide
5