Configuration Manual

You can create and edit the arm/disarm password, duress code and unlock password
of the indoor staon.
Steps
1.
Tap Sengs → → Password to enter the password sengs page.
2.
Tap Arm/Disarm, Unlock or Duress Code to pop up the password sengs dialog
box.
Arm/Disarm
The password is for arming or disarming the zone for the indoor
staon.
Note
By default, the Arm/Disarm page is hidden. Tap Sengs → → Shortcut
Sengs and enable Alarm. And the Arm/Disarm page will be displayed.
Unlock
Create the indoor staon's unlock password. If the device has connected to a
lock, enter the password to unlock.
Duress Code
When you are hijacked and forced to open the door, you can enter the
duress code. An alarm will be triggered to nofy the management center
secretly.
Note
The duress code and the unlock password cannot be the same.
3.
Enter the old password.
4.
Create a new password and conrm it.
5.
Tap OK to save the sengs.
1.4 Synchronize Time
Steps
1.
Tap
Sengs → → Time and Date → Sync Time to enter the me
synchronizaon page.
Network Indoor
Staon Conguraon Guide
9