Configuration Manual

Figure 2-17 Incoming Call Linkage
2.
Enable and select triggers.
When the calling incoming, the alarm you linked will be triggered.
Relay
Click Relay. Select a relay and click " " and set the relay name and output delay
me. Click Save to save the sengs.
2.4.3 Network
Local Network Conguraon
Steps
1.
Click Local Network
Conguraon to enter local network conguraon page.
Figure 2-18 Local Network Conguraon
2.
Enter the local IP address, subnet mask, gateway address, and port No.
3.
Click Save to enable the sengs.
Network Indoor
Staon Conguraon Guide
32