Configuration Manual

Linked network parameters refers to the network parameters of devices (like door
staon, doorphone, main staon, center, etc.), to which the indoor staon is linked.
Linked devices for the indoor staon refers to door staon, center, main staon, and
doorphone.
With the private SIP protocol, intercom can be realized only when all these devices
are in the same network segment with the indoor staon.
With the standard SIP protocol, intercom can be realized when all these devices
support the standard SIP protocol.
Steps
Note
•
The doorphone does not support adding with the standard SIP protocol.
•
Here take door staon network sengs as example.
1.
Tap
Sengs → → Conguraon , and enter admin (acvaon) password.
2.
Tap to enter the device management page.
Figure 1-3 Device Management Page
3.
Tap Indoor Extension and select a connect indoor extension.
4.
Tap Main Door
Staon to pop up the device informaon dialog.
Network Indoor
Staon Conguraon Guide
3