Video Intercom Door Station (V Series) User Manual UD02940B
Video Intercom Door Station·User Manual User Manual © 2016 Hangzhou Hikvision Digital Technology Co., Ltd. This user manual is intended for users of the models below: Series Model DS-KV8102-IM DS-KV8202-IM Door Station (V Series) DS-KV8402-IM DS-KV8102-IP DS-KV8102-VP It includes instructions on how to use the Product. The software embodied in the Product is governed by the user license agreement covering that product.
Video Intercom Door Station·User Manual FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, SECURITY BREACHES, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF OR RELIANCE ON THIS MANUAL, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY OR CERTAIN DAMAGES, SO SOME OR ALL OF THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.
Video Intercom Door Station·User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Video Intercom Door Station·User Manual 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.
Video Intercom Door Station·User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Warnings and Cautions: Warnings: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Warnings Follow these safeguards to prevent serious injury or death.
Video Intercom Door Station·User Manual The device cover for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time.
Video Intercom Door Station·User Manual Table of Contents 1 Overview ...................................................................................................... 1 1.1 Introduction ............................................................................................................. 1 1.2 Main Features .......................................................................................................... 1 2 Appearance ...................................................................
Video Intercom Door Station·User Manual 7.6 Batch Upgrading .................................................................................................... 38 7.6.1 Adding Devices for Upgrading ......................................................................... 38 7.6.2 Upgrading Devices ........................................................................................... 40 8 Remote Operation via iVMS-4200 .............................................................. 42 8.
Video Intercom Door Station·User Manual 1 Overview 1.1 Introduction The door station (V series) can realize functions such as video intercom, access control, one-card system, zone alarm, and visitor messages to form a complete smart community video intercom solution. The door station (V series) is mainly applied in the villa, and can works as door station, outer door station, and doorphone. 1.2 Main Features Video intercom function HD video surveillance (Max.
Video Intercom Door Station·User Manual 2 Appearance 2.1 Appearance of DS-KV8X02-IM For device DS-KV8X02-IM, the number of call buttons varies according to its model. Take the figure of device DS-KV8402-IM as an example. For device DS-KV8102-IM, there is only 1 call button. For device DS-KV8202-IM, there are 2 call buttons. For device DS-KV8402-IM, there are 4 call buttons.
Video Intercom Door Station·User Manual You need not customize the Room No. for device DS-KV8102-IM. Default settings of call button: when you press the call button, it calls the resident; and when you hold down the call button, it calls the center. You can change the calling mode of the call button via Batch Configuration Tool or iVMS-4200 client software. See 7.4.2 Video Intercom for detail steps. 2.
Video Intercom Door Station·User Manual Default settings of call button: when you press the call button, it calls the resident; and when you hold down the call button, it calls the center. You can change the calling mode of the call button via Batch Configuration Tool or iVMS-4200 client software. See 7.4.2 Video Intercom for detail steps.
Video Intercom Door Station·User Manual 3 Typical Application 3.1 Typical Application of DS-KV8X02-IM Please refer to the following figure for typical application of DS-KV8102-IM/ DS-KV8202-IM/ DS-KV8402-IM door station.
Video Intercom Door Station·User Manual 3.2 Typical Application of DS-KV8102-XP Please refer to the following figures for typical applications of DS-KV8102-IP/ DS-KV8102-VP door station.
Video Intercom Door Station·User Manual 4 Terminals and Interfaces Please refer to the following figure for terminals and interfaces of door station. ①-⑤ ⑥-⑦ ⑧-⑨ ⑩-⑫ ⑬ Figure 4-1 Terminals and Interfaces Table 4-1 Descriptions of Terminals and Interfaces Terminals and Interfaces Name ALARM IN No.
Video Intercom Door Station·User Manual 5 Installation and Wiring 5.1 Installation of DS-KV8X02-IM To install the door station onto the wall, you are required to utilize a matched gang box. 5.1.1 Gang Box for DS-KV8X02-IM Please refer to the following figures for the dimensions of gang box for DS-KV8102-IM/ DS-KV8202-IM/ DS-KV8402-IM door station. 97 100 168 45 49 54 73.
Video Intercom Door Station·User Manual The dimensions above are theoretical. The actual size can be slightly different from the theoretical dimension. 5.1.2 Wall Mounting with Gang Box of DS-KV8X02-IM Steps: 1. Take the gang box and screws from the packing box. 2. Chisel a hole in the wall for inserting the gang box. The size of the hole should be 90 (width) ×170 (length) × 38(depth) mm. 3. Insert the gang box into the hole and fix it with 4 PA4 screws, as shown in the figure below.
Video Intercom Door Station·User Manual 5. After inserting the door station into the gang box, pull the device downwards to hook the door station with the gang box. 6. Secure the door station by inserting the fixing screw according to the direction of the arrow of the figure below. M4 Screw Figure 5-4 Secure the Door Station (DS-KV8X02-IM) 5.2 Installation of DS-KV8102-XP 5.2.
Video Intercom Door Station·User Manual The dimension of gang box for model DS-KV8102-IP/ DS-KV8102-VP door station is: 75 (width) × 75 (length) × 50 (depth) mm. The dimensions above are theoretical. The actual size can be slightly different from the theoretical dimension. 5.2.2 Wall Mounting with Gang Box of DS-KV8102-XP Steps: 1. Take the gang box, installation plate and screws from the packing box. 2. Chisel a hole in the wall for inserting the gang box.
Video Intercom Door Station·User Manual 6. After installing the installation plate, install the door station by inserting the rear component into the hollow area of the installation plate. While inserting the door station into the installation plate, incline the device by 5~10°, as shown in the figure below. Hollow Area Rear Component Figure 5-8 Install the Door Station (DS-KV8102-XP) 7. Secure the door station by inserting the fixing screw according to the direction of the arrow of the figure below.
Video Intercom Door Station·User Manual 5.3 Wiring Description 5.3.1 Door Lock Wiring Figure 5-10 Door Lock Wiring Terminal DR_NC/DR_COM is set as default for connecting magnetic lock/electric bolt; terminal DR_NO/DR_COM is set as default for connecting electric strike. To connect electric lock, it is required to set the output of terminal DR_NC/DR_COM/DR_NO to be electric lock with Batch Configuration Tool or iVMS-4200 client software.
Video Intercom Door Station·User Manual 5.3.2 Door Magnetic Wiring Figure 5-11 Door Magnetic Wiring To connect door magnetic, it is required to set the input of one alarm in terminal (ALARM_1, ALARM_2, ALARM_3, or ALARM_4) to be door magnetic with Batch Configuration Tool or iVMS-4200 client software. 5.3.
Video Intercom Door Station·User Manual To connect exit button, it is required to set the input of one alarm in terminal (ALARM_1, ALARM_2, ALARM_3, or ALARM_4) to be exit button with Batch Configuration Tool or iVMS-4200 client software. 5.3.
Video Intercom Door Station·User Manual 6 Before You Start For the first time use of the device, you are required to activate the device. You can activate the device and set the device password via internet with Batch Configuration Tool, or with iVMS-4200 client software, or with Video Intercom Set-up Tool. To activate the device with Batch Configuration Tool or iVMS-4200, refer to 7 Remote Operation via Batch Configuration Tool and 8 Remote Operation via iVMS-4200. Please refer to 7.
Video Intercom Door Station·User Manual 7 Remote Operation via Batch Configuration Tool 7.1 Activating Device Remotely Purpose: You are required to activate the device first by setting a strong password for it before you can use the device. Activation via Batch Configuration Tool, and Activation via iVMS-4200 are supported. Here take activation via Batch Configuration Tool as example to introduce the device activation. Please refer to the user manual for the activation via iVMS-4200. Steps: 1.
Video Intercom Door Station·User Manual STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
Video Intercom Door Station·User Manual Figure 7-4 Editing Network Parameters The default port No. is 8000. After editing the network parameters of device, you should add the devices to the device list again. 7.3 Adding Device Before you start: Make sure the device to be added has been activated. Purpose: For batch configuration tool software, you should add device to the software so as to configure the device remotely. The software provides 3 ways for adding the devices.
Video Intercom Door Station·User Manual 2. Click the button to pop up the login dialog box. Figure 7-6 Login Dialog Box 3. Enter the user name and password. 4. Click the OK button to save the settings. Only devices successfully logged in will be added to the device list for configuration. If you add devices in batch, please make sure selected devices have the same user name and password. 7.3.2 Adding by IP Address Purpose: You can add the device by entering IP address. Steps: 1.
Video Intercom Door Station·User Manual Figure 7-8 Adding by IP Address 4. Click the OK button to add the device to the device list. You cannot add the device(s) to the device list if the user name and password are not identical. When you add devices by IP Address, IP Segment or Port No., the devices should be online devices. 7.3.3 Adding by IP Segment Purpose: You can add many devices at once whose IP addresses are among the IP segment. Steps: 1.
Video Intercom Door Station·User Manual Figure 7-10 Adding by IP Segment 5. Click the OK button to search and add the devices whose IP addresses are within the range of the defined IP segment to the device list. 7.4 Configuring Devices Remotely In the device list area, select a device and click the remote configuration interface. or to enter Figure 7-11 Remote Configuration 7.4.
Video Intercom Door Station·User Manual General Click the General button to enter device general parameters settings interface. You can view and edit the device name and device ID. Figure 7-13 General Time Steps: 1. Click the Time button to enter the device time settings interface. Figure 7-14 Time Settings 2. Select Time Zone or Enable NTP. Time Zone 1) Select a time zone from the drop-down list menu. 2) Click the Synchronization button. NTP 1) Check the checkbox of Enable NTP to enable NTP.
Video Intercom Door Station·User Manual The default port No. is 123. System Maintenance Purpose: You can operate the system management and remote upgrading on the system maintenance interface. Steps: 1. Click the System Maintenance button to enter the system maintenance interface. Figure 7-15 System Maintenance 2. Click Reboot and the system reboot dialog box pops up. Click Yes to reboot the system. 3. Click Restore Default Settings to restore the default parameters. 4.
Video Intercom Door Station·User Manual Figure 7-16 Import File 6. Click Export Configuration File and the export file window pops up. Select the saving path of remote configuration files and click Save to export the configuration file. Figure 7-17 Export File 7. Click to select the upgrade file and click Upgrade to remote upgrade the device. The process of remote upgrade will be displayed in the process bar.
Video Intercom Door Station·User Manual Click Restore Default Settings button, all default settings, excluding network parameters, will be restored. Click Restore All button, all default settings, including network parameters, will be restored. The device will be reset to inactivated status. User Purpose: You can edit the password for logging in the device. Steps: 1. Click the User button to enter the user information editing interface. Figure 7-19 Select User Name 2.
Video Intercom Door Station·User Manual After editing the password of device, click button from the device list, the added device will not be there. You should add the device again with new password to operate the remote configuration. RS485 Click the RS485 button to enter the RS485 setting interface. You can view and edit the RS485 parameters of the device. Figure 7-21 RS-485 For door station (V series), there are 4 choices for the working mode: transparent channel, card reader, disable, and custom.
Video Intercom Door Station·User Manual 2. Select the device type from the drop-down list, and set the corresponding information. 3. Click the Save button to enable the device number configuration. For main door station (D series or V series), the serial No. is 0. For sub door station (D series or V series), the serial No. is higher than 0. Serial No. ranges from 1 to 99.
Video Intercom Door Station·User Manual Figure 7-24 Access Control and Elevator Configuration 2. Set corresponding parameters on the access control and elevator settings interface. Access Control 1) Select the door No. 2) Set the door-unlocked duration. 3) (Optional) Enable the function of Delay Door Alarm. 4) Click the Save button to enable the settings. Enabling Card Encrypt, the door station can recognize the encrypted information of the card when you swiping the card on the door station.
Video Intercom Door Station·User Manual IO Input and Output Step: 1. Click the I/O Input and Output button to enter the I/O input and output interface. Figure 7-25 IO Input/Output Configuration 2. Select I/O input No., input mode, output No., and output mode. 3. Click the Save button to enable the settings. For door station (V series), there are 4 I/O Input Terminals, corresponding to SENSOR interfaces (S1, S2, S3, S4) of door station.
Video Intercom Door Station·User Manual Call Button 1. Click the Call Buttons button to enter the calling buttons settings interface. Figure 7-27 Call Buttons Interface 2. Select the button number. 3. Enter the floor No. and the room No.. 4. Click the Save button to enable the settings. For DS-KV8102-IM, DS-KV8102-IP, and DS-KV8102-VP, there is no need setting the Room No..
Video Intercom Door Station·User Manual After editing the local network parameters of device, you should add the devices to the device list again. Linked Devices Network Configuration Purpose: In the linked devices network configuration interface, you can configure the network parameters of master stations, SIP servers and management centers of the same LAN. The devices can be linked to the door station and realize the linkage between these devices. Steps: 1.
Video Intercom Door Station·User Manual Figure 7-30 FTP Configuration 2. Check the checkbox of Enable Main FTP. 3. Select IP address from the drop-down list of server mode. 4. Enter the FTP server address, and port No.. 5. Check the checkbox to enable the anonymity (optional). 6. Enter the name and password. 7. Select the directory structure and set the separator, naming item, and naming element. 8. Click the Save button to enable the FTP parameters settings. The default port No. is 21.
Video Intercom Door Station·User Manual Figure 7-31 Video Display 2. Select the camera No.. 3. Select the video standard (PAL and NTSC can be selected). 4. Set the brightness, contrast, and saturation of the video. 5. Click the Save button to enable the settings. Click the Restore Default Settings button to restore all parameters excluding network parameters to the factory settings. The live view of indoor station will be disabled. 7.
Video Intercom Door Station·User Manual Figure 7-32 Video Device Set-up Tool 7.5.1 Setting a Community Structure Set a community structure in the video intercom device set-up tool first, based on the real community situation, and then assign devices to the community accordingly. Figure 7-33 Setting a Community Structure 7.5.2 Setting Main/Sub Door Station Setting Main Door Station Purpose: You can activate the online main door station, and configure the building No. for the online main door station.
Video Intercom Door Station·User Manual Figure 7-34 Setting Main Door Station 2. Select the door station type from the drop-down list menu: Door Station for Unit, or Door Station for Villa. 3. Enter the main door station start IP address, set the main door station floor No., and then click the Calculate button to generate the main door station end IP address and main door station No. (like 1-1-1) automatically. 4.
Video Intercom Door Station·User Manual Setting Sub Door Station Steps: 1. Select the community, and press the Sub Door Station tab to switch to the sub door station configuration interface. Figure 7-35 Setting Sub Door Station 2. Select the door station type from the drop-down list menu: Door Station for Unit, or Door Station for Villa. 3. Set the sub door station parameters (sub door station amount, floor No.
Video Intercom Door Station·User Manual Up to 8 sub door stations can be added to a main door station. For the login password, if the sub door station has been activated, enter the activation password here. If the sub door station is not activated, create a login password here, and the sub door station will be activated simultaneously. When the device is successfully configured, it prompts the note: Configuring main door station parameters succeeded 7.
Video Intercom Door Station·User Manual Figure 7-37 Login 2. Select a device, enter the user name and password, and click the Login Device button. 3. Click the Add Device button, and the device is added to the batch upgrading tool.
Video Intercom Door Station·User Manual Adding by IP Address/IP Segment Steps: 1. Click the Manual button to open the device adding window. 2. Enter the corresponding information (IP address, user name, password, start IP address, end IP address). 3. Click the Add button. Figure 7-39 Adding by IP Address/IP Segment 7.6.2 Upgrading Devices There are 2 upgrading modes available: upgrading by file, and online upgrading.
Video Intercom Door Station·User Manual Figure 7-40 Upgrade by File 3. Open the upgrading file, and click the Upgrade button. Online Upgrading Online Upgrading: The batch upgrading tool will search the latest upgrading file for the device automatically. You upgrade the device or devices via the local upgrade files. Steps: 1. Select a device or multiple devices, and select “Online Upgrading” as the upgrading mode. 2. Click the Download button.
Video Intercom Door Station·User Manual 8 Remote Operation via iVMS-4200 The Video Intercom module provides remote control and configuration on video intercom products via the iVMS-4200 client software. Before remote configure and control the video intercom, you are required to add the device to the software first. Refer to 8.2 Device Management. For remote configuration of video intercom device via the iVMS-4200 client software, refer to 8.3 Configuring Devices Remotely via iVMS-4200.
Video Intercom Door Station·User Manual Figure 8-1 System Configuration Interface 8.2 Device Management Purpose: Device management includes device activation, adding device, editing device, and deleting device, and so on. After running the iVMS-4200, video intercom devices should be added to the client software for remote configuration and management. 8.2.
Video Intercom Door Station·User Manual 1. Click the icon on the control panel, or click Tools->Device Management to open the Device Management page. 2. Click the Server tab. To add indoor station or master station: 1) Click Add New Device Type to enter add new device type interface. Select Indoor Station/Master Station and click OK. Figure 8-2 Adding New Device Type 2) In the Server tab, Video Intercom Device will display, select Video Intercom Device and add indoor station and master station.
Video Intercom Door Station·User Manual 5. Click Add to Client to open the device adding dialog box. 6. Input the required information. Nickname: Edit a name for the device as you want. Address: Input the device’s IP address. The IP address of the device is obtained automatically in this adding mode. Port: Input the device’s port No.. The default value is 8000. User Name: Input the device’s user name. By default, the user name is admin. Password: Input the device password. By default, the password is 12345.
Video Intercom Door Station·User Manual In the pop-up message box, enter the user name and password for the devices to be added. Add All the Online Devices If you want to add all the online devices to the client software, click Add All and click OK in the pop-up message box. Then enter the user name and password for the devices to be added. 8.2.
Video Intercom Door Station·User Manual This option is available to door stations. Figure 8-6 Resetting Password (Option 1) 1. Click Export to save the device file on your computer. 2. Send the file to our technical engineers. 3. Our technical engineer will send you a file to you. After receiving a file from the technical engineer, select Import File from Key Importing Mode drop-down list and click to import the file. 4. Input new password in text fields of Password and Confirm Password. 5.
Video Intercom Door Station·User Manual Figure 8-7 Resetting Password (Option 2) 1. Click Export to save the device file on your computer. 2. Send the file to our technical engineers. 3. Click Import and select the file received from the technical engineer. 4. Input new password in text fields of Password and Confirm Password. 5. Click OK to reset the password.
Video Intercom Door Station·User Manual When starting the live view of door station via iVMS-4200, you can capture the live view picture. The captured picture can be uploaded and stored in the storage server. This function is only available to door stations. You are required to add storage server to the iVMS-4200, and format the HDDs first before uploading and storing captured pictures. 8.4.
Video Intercom Door Station·User Manual 8.4.2 Formatting the HDDs The HDDs of the storage server need to be formatted for the captured picture storage. Steps: 1. Select the added storage server from the list and click Remote Config. 2. Click Storage->General to enter the HDD Formatting interface. 3. Select the HDD from the list and click Format. You can check the formatting process from the process bar and the status of the formatted HDD changes from Unformatted to Normal Status.
Video Intercom Door Station·User Manual Steps: 1. Open the Record Schedule page. 2. Select the camera from the Camera Group list. 3. Select the storage server from the Storage Server drop-down list. You can click Storage Server Management to add, edit or delete the storage server. 4. Check the checkbox of Picture Storage to store the alarm pictures of the camera when event occurs. Figure 8-10 Setting Storage Server 5. Click Set Quota to enter the HDD management interface of the storage server.
Video Intercom Door Station·User Manual Figure 8-11 Setting Quota Example: If you set the picture quota as 60%, then the 60% of the storage space can be used for storing the captured pictures. 6. Click Save to save the settings. 8.5 Video Intercom Configuration Click the icon on the control panel of iVMS-4200 or click View -> Video Intercom to open the Video Intercom page. On the Video Intercom page, you can control video intercom devices remotely.
Video Intercom Door Station·User Manual Card Management: Add unauthorized cards to the iVMS-4200, and issue card to the door station via the iVMS-4200. Refer 8.5.3 Card Management for detail steps. Once you issue cards via the iVMS-4200, the card issuing function of the corresponding door station will be disabled automatically. Notice Management: Send information to indoor stations, search information, search call logs, and search unlocking logs. Refer 8.5.4 Notice Management for detail steps.
Video Intercom Door Station·User Manual Figure 8-13 Adding Group 2. Click to pop up group adding window, and input the corresponding information accordingly. Select Community as group type, and then Input the Community No., building No., and Unit No. to set the community structure, as shown in the figure below. Figure 8-14 Adding Community Select Outer Door Station as group type, and then input the outer door station No. (Range: 1 to 9) to set the outer door station, as shown in the figure below.
Video Intercom Door Station·User Manual Figure 8-15 Adding Outer Door Station Select Other as group type, and then input the group name. Figure 8-16 Adding Other For example: You can name the group as administrator, entrance guard and cleaning staff, etc. When selecting Other as the group type, you can set different groups for staff other than residents, such as administrator, security guard and cleaning staff, etc., and you can assign cards to these staff and configure different permissions to them.
Video Intercom Door Station·User Manual Assigning IP Devices to Group After adding groups to Community, Outer Door Station, or Other, you should assign devices to the group. For example: You should assign indoor stations and door stations to the group 1-1-1 in Community. 1. Click Add to enter the Add Resident Interface and the video intercom devices added to the client software will be listed, as shown in the figure below. Figure 8-17 Adding Resident 2. Check the checkbox of device.
Video Intercom Door Station·User Manual Adding Devices in Batch: Enter the start floor and end floor, and set the room numbers. Figure 8-18 Adding Devices in Batch Room Numbers here refers to the room numbers in each floor. Adding Devices Singlly: Enter the room No.. Figure 8-19 Adding Device Singly The room No. format is like 101. 2. Click OK to save the settings.
Video Intercom Door Station·User Manual Modifying Device Information 1. Select an added device. 2. Click Modify to enter the device modifying interface. Figure 8-20 Modifying Device Information 3. Click OK to complete the device modifying operation. Deleting Device 1. Select an added device. 2. Click Remove to pop up a dialog box. Figure 8-21 Information 3. Click OK to complete the group deleting operation. 8.5.
Video Intercom Door Station·User Manual Make sure the SIP server IP address of the door station is not configured (or abnormal). Steps: Press Calling Center key on the door station. Figure 8-22 Calling from Door Station When the SIP server IP of the door station is configured, press Calling Center key on the door station to call the master station instead of iVMS-4200. Click Unlock to unlock the building or villa door via iVMS-4200, no matter whether answering the call from door station or not.
Video Intercom Door Station·User Manual 8.5.3 Card Management Purpose: You can add unauthorized cards to the community and then you can assign the cards to the corresponding indoor station and door stations. For example, if there are 3 residents living in Room 401, you can assign 3 cards to No. 401 Indoor Station. For each indoor station, you can assign multiple cards, and you can assign these cards to the door station in the same building. Note: Indoor extension does not support Card Management.
Video Intercom Door Station·User Manual Figure 8-24 Adding Cards in Batch 2. Select card adding mode and card type. Two types of card are available. Resident Card is used by residents living in the community, and Other Card is used by visitors (guest, serviceman, etc.) in the community. If you add card in batch, please set the start card No. and the end card No.. If you add card singly, please enter the card No..
Video Intercom Door Station·User Manual Figure 8-25 Issuing Card Issuing Resident Cards Steps: 1. Select Community from the organization list (like 1-1-1) and the indoor stations of the community will be listed in the resident list.
Video Intercom Door Station·User Manual 2. Click Card Selection to pop up card selection window where unauthorized resident cards are listed. Figure 8-27 Selecting Cards 3. Check the checkboxes of the cards or enter the card No. in the filter textbox you need to assign to the indoor station, and check the checkbox of door stations, doorphones and outer door stations. Only resident cards can be assigned to indoor stations. 4. Click Issue Card to complete the card issuing operation.
Video Intercom Door Station·User Manual Figure 8-28 Displaying Card Issued After issuing resident cards to the indoor station, the card No. will also be listed in the resident list. Issuing Other Cards Steps: 1. Select Other from the group list (like Cleaning Staff).
Video Intercom Door Station·User Manual 2. Click Card Selection to pop up card selection window where unauthorized other cards are listed. Figure 8-30 Selecting Cards 3. Check the checkboxes of the cards or enter the card No. in the filter textbox you need to assign to the person, and check the checkbox of door stations, doorphones and outer door stations. 4. Click Issue Card to complete the card issuing operation.
Video Intercom Door Station·User Manual Figure 8-31 Displaying Card Issued After issuing other cards to the person, the card No. will also be listed in the resident list page. Canceling Cards When canceling cards, cards that have been issued will be reset to authorized ones. Via iVMS-4200, there are two ways to cancel the cards which have been issued. Option 1: Steps: 1. Select Community from the organization list (like 1-1-1) and the indoor stations of the community will be listed in the resident list.
Video Intercom Door Station·User Manual Figure 8-32 Card Selection Interface 2. Click Card Selection to pop up card selection window where normal cards and unauthorized resident cards are listed. Figure 8-33 Selecting Cards 3. Check the checkboxes of the cards that has been issued (normal cards). 4. Click Issue Card to complete the card canceling operation.
Video Intercom Door Station·User Manual On the card issuing interface, check the checkboxes of Room No. (for resident card) or Name (for other card), click Cancel Card to cancel all card issued to the device. Through Option 1, you can cancel card from single or certain door stations. Through Option 2, you will cancel all issued cards at a time. Normal Card Click Normal Card to display normal card list.
Video Intercom Door Station·User Manual Figure 8-35 Importing File 2. Click Export Template to export the template of the batch import file. 3. Fill in the template of the batch import file and save it. 4. Click to select the batch import file and click Open. 5. Click OK to start importing the batch import file. Batch Exporting Unauthorized Cards Steps: 1. After adding unauthorized cards, and click Batch Export. 2. Select the saving file path and click Save. 3.
Video Intercom Door Station·User Manual Figure 8-36 Call Log Interface 3. Click Export to export the call logs as an excel file. Querying Unlocking Log Steps: 1. Click Query Unlocking Logs to enter the unlocking log querying page. 2. Select the unlocking type, device type, and set the start time and end time, and click Query.
Video Intercom Door Station·User Manual Figure 8-37 Unlocking Log Interface 3. Click Export to export the unlocking logs as an excel file. 8.6 Device Arming Control Steps: 1. Select Tool->Device Arming Control to pop up device arming control window.
Video Intercom Door Station·User Manual 2. Set the arming status of the device as armed, and the alarm information will be auto uploaded to the client software when alarm occurs. Figure 8-39 Device Arming Control Figure 8-40 Alarm Events After adding the device to the client software, it will be armed automatically.
Video Intercom Door Station·User Manual 9 Local Operation 9.1 Calling Resident 9.1.1 Calling Resident (DS-KV8X02-IM) You can call the resident by pressing the call button. For device DS-KV8X02- IM, the number of call buttons varies according to its model. Take the figure of device DS-KV8402-IM as an example. For device DS-KV8102-IM, there is only 1 call button. For device DS-KV8202-IM, there are 2 call buttons. For device DS-KV8402-IM, there are 4 call buttons.
Video Intercom Door Station·User Manual When the video intercom between you and the resident is realized, you can speak to the resident, and the live view of door station will be displayed on the connected indoor station. When live view of door station is displayed on other devices or door station is calling resident, the door station will detect the brightness of video. When the brightness is lower than the expected threshold, the supplement light will be enabled.
Video Intercom Door Station·User Manual 2. The resident can receive/decline the video call, unlock the door, call the elevator, etc. When the video intercom between you and the resident is realized, you can speak to the resident, and the live view of door station will be displayed on the connected indoor station. When live view of door station is displayed on other devices or door station is calling resident, the door station will detect the brightness of video.
Video Intercom Door Station·User Manual 9.3 Unlocking Door Purpose: After issuing cards, you can unlock the door by swiping the issued card. Step: 1. Swipe the card on the card induction area. 2. Hear a voice prompt of the device: Door is open. You cannot unlock the door by swiping the main card.
Video Intercom Door Station·User Manual Appendix Installation Notice While installing the door station, please make sure that the distance between any two devices is far as possible to avoid the howling and echo. The distance between two devices is recommended to be longer than 10 meters. Devices here refer to indoor station, door station, doorphone and master station. Wiring Cables Cable Specification Power Cord of Door Station RVV 2*1.
Video Intercom Door Station·User Manual 78
