Body Camera Quick Start Guide Scan the QR code for Portable Device Assistant application. Scan the QR code for User Manual.
Quick Start Guide © 2019 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as “Hikvision”), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. Safety Instruction Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information.
1 Product Introduction 1.1 Introduction Body camera (hereinafter referred to as device) highly integrates with record, local storage, GPS, etc. It is embedded with positioning module with high sensitivity and ultra-low consumption, locating the occurring positon of events accurately. It can record the process and condition of events completely via recorded video and audio. You can also tag the important data for future search.
No. 2 3 Name Tag button/LED light button Description During record, press it to make a tag for the important data. After the device starts up, hold it to turn on LED light for light supplement or emergency illumination. Hold it again to turn off LED light. If you set IR as Open, the IR lights will be enabled during record or live view of network transmission.
No. Name Description After the device starts up, hold it for three seconds to turn off the device. The device is being turned on: Indicator 1 changes to red and then becomes unlit. Indicator 2 becomes solid green. The device is recording: Indicator 1 flashes in red slowly, and indicator 2 is solid green. Indicator 1 The device is in pre-record: Indicator 1 flashes in green slowly, and indicator 2 is solid green.
2 Installation 2.1 Install Shoulder Clip Install the shoulder clip if you want to wear the device on your shoulder. Steps: 1. Insert the shoulder clip down into the slot on the device back. Figure 2-1 Install Shoulder Clip 2. Check if the clip is inserted into the slot firmly. Figure 2-2 Successful Installation 2.2 Uninstall Shoulder Clip You can uninstall the shoulder clip if you do not want to wear the device on your shoulder. Steps: 1.
Shutdown: Hold for 3 seconds. Then the device vibrates for 0.5 second, and the two indicators becomes unlit, indicating the device is shut down. Vibration is enabled by default. You can disable vibration via Body Camera Assistant software. Refer to User Manual for details. 3.2 Charge When the device is in low power, Indicator 1 flashes in red fast, and indicator 2 stays the former status. Charge it in time. Steps: 1. Open the Mini USB interface cover. 2.
When the memory is insufficient, indicator 1 stays the former status, indicator 2 flashes in yellow fast, and the device vibrates for 0.5 second twice every 30 seconds. When the power is low, indicator 1 flashes in red fast, indicator 2 stays the former status, and the device vibrates for 0.5 second twice every 30 seconds. When the memory is insufficient, it is recommended to back up the data and clear the internal storage to avoid the normal usage. For backup, refer to User Manual for details.
Figure 4-2 Log out 2. Click Exit to log out of the assistant. 5 FAQ 5.1 Why does the device faile to start up? The device is out of power. Shut down the device and connect it to the charger to charge for at least 20 minutes. 5.2 Why does the device fail to record? There is insufficient memory. Back up the data in the device and clear the storage. Formatting storage error. Format the device via Body Camera Assistant. 5.